cold rolled steel sheet chemical specification

cold rolled steel sheet chemical specification

cold rolled steel sheet chemical specification suppliers, distributors, production and supply of cold rolled steel sheet chemical specification, are committed to providing high-quality products, as well as excellent cutting, forming, drilling and other processing services. If you have any needs, please feel free to contact:

[email protected]


cold rolled steel sheet chemical specification

5 rows · 1008/1010. 1/4 Hard. 1008/1010. 1/2 Hard. 1008/1010. Full Hard. 1008/1010. Cold Rolled 1008/1010 Standard Specification for Steel, Sheet, Cold-Rolled 1.1 This specification covers cold-rolled, complex phase (CP) grade, dual phase (DP) grade, and transformation induced plasticity (TRIP) grade steel sheet in coils and cut lengths. 1.2 Product furnished under this specification shall conform to the applicable requirements of the latest issue of Specification A568/A568M , unless otherwise provided herein. cold rolled steel sheet chemical specification - S460M The chemical composition of C 1020 plates include carbon (0.170 to 0.230)%max, manganese e (0.300 to 0.600)% max, phosphorus around 0.040% and sulphuric cold rolled steel sheet chemical specification COLD ROLLED COILS AND SHEETS - JSW Steel Ltduses proven and reliable technology to process hot rolled carbon steel as per the technical A1008 Cold Rolled Steel SheetA1008 is a standard specification for cold rolled, carbon steel. The process of cold rolling the sheet creates a smooth surface which is typically oiled to prevent surface rust from forming. Compared to hot rolled steel, A1008 is known for having excellent weldability and formability. The cold rolling process also creates good drawing and spinning characteristics and a steel sheet that works well in most common Cold Rolled Steel Sheet for Drawing EN 10130 DC01 DC06

Turning and Milling [5 Sets]

Turning-and-Milling
Technical Data Wuzhong Double Column Wuzhong Double Column Schess
Height 5000mm 6000mm 6500mm 3000mm
Load Bearing 160t 400t 600t 50t
Table Diameter Φ7200mm Φ10000mm Φ10000mm Φ3500mm
Max. machining Diameter Φ8000mm Φ12500mm Φ22000mm Φ4000mm
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 5-Axis Simultaneous Motion

Multi-Drilling Machine [32Sets]

Multi-Drilling Machine
Technical Parameters INNSE Italy Shenyang Machine Tool GDC60130MD, GDC3070MD DAE-YANG South Korea
X-axis, Y-axis, Z-axis 8000 4500 1000mm 13000 6000 500mm 7000 3000 500mm 6000 6000 800mm
Boring Diameter ≤Φ120mm ≤Φ100mm ≤Φ100mm Φ2 -Φ 100mm
Processing Depth ≤420mm ≤300mm ≤200mm ≤400mm

For more information, please contact:
[email protected]

Vertical Lathe [10 Sets]

Vertical Lathe
Technical Data Wuzhong Wuzhong Qizhong Qizhong Qizhong
Table Diameter Φl600mm Φ3150mm Φ3600mm Φ4000mm Φ4000mm
Max. Machining Diameter Φ2000mm Φ3500mm Φ4000mm Φ5000mm Φ5000mm
Height 1600mm 2500mm 2000mm 2500mm 4000mm
Load Bearing 5t 40t 32t 50t 50t

Floor-type Milling-boring Machine [11 Sets]

Floor-type Milling-boring Machine
Technical Data Wuzhong Wuzhong Pama
X axis
Y axis
(Z+W) axis
12000
4000
(800+800) mm
16000
5000
(1200*1200)mm
12000
3000
(1200+1000)mm
Table Size 3000*3000mm 4000*4000mm 3600*4000mm
Load Bearing 60t 100t 65t
Boring Bar Dia Φ160mm Φ200mm Φ160mm

Technical Data Pama INNSE260 INNSE280
X axis
Y axis
(Z+W) axis
20000
5000
(1200+1000)mm
17500
6000
(1400+1600)mm
25700
8000
(1800+2000)mm
Table Size 4000*4000mm 3500mm*5000mm 5000mm*9000mm
Load Bearing 100t 100t 250t
Boring Bar Dia Φ180mm Φ260mm Φ280mm

For more information, please contact:
[email protected]

Portal-type Processing Center [16 Sets]

Portal-type Processing Center
Technical Data Schess, German Okuma, Japan Wuzhong Double Column Youjia(FV4224E) Youjia(FV3215)
Height 7000mm 1850mm 3000/1750mm 5000/2000mm 1170mm 970mm
Width between Columns 8000mm 3050mm 4300mm 6000mm 2400mm 1600mm
Length 50000mm 5000mm 20000mm 28000mm 4200mm 3200mm
Table Size 8000*40000mm 2500*4800mm 3000*26000mm 5000*30000mm 2000*4000mm 1400*3000mm
Rotary table Diameter Φ6000mm —— ——
Simultaneous 7-5 Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion
Technical Data Mitsubishi I II III, Japan
Height 1950mm 1950mm 2550mm
Width between Columns 4250mm 4250mm 3800mm
Length 10200mm 8200mm 6200mm
Table Size 3500*10000mm 3500*8000mm 3000*6000mm
Rotary table Diameter
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion

Deep-Hole Drilling Machine [11 Sets]

Deep-Hole Drilling Machine
Technical Parameters INNSE Italy DAE-YANG South Korea
X-axis, Y-axis, Z-axis 6000 4500 1100mm 4000 3000 1000mm
Boring Diameter ≤Φ60mm Φ16-Φ80mm
Processing Depth ≤1000mm ≤1000mm

For more information, please contact:
[email protected]

Contact us